3.1 NMEA Setting
NMEA port
1. Press the [MENU] key.
2. Press the software key labeled "CONFIGURATION".
3. Press the software key labeled "SETUP NMEA PORT1".
4. Select "FORMAT" by the arrow key.
5. Press the software key labeled "EDIT" to display the following
message.
s FORMAT
DGPS 3D
Figure 3-1 Output Format Display
6. Select NMEA version by the arrow key. The selected item is indi-
cated by black button.
7. Press the software key labeled "ENTER".
8. Press the [PLOT] key to finish.
3. Initial Settings
OUTPUT FORMAT
NMEA 0183
VER 1.5
NMEA0183 Ver1.5
' NMEA0183 Ver2.0
SETUP
PORT1
ENTER
CANCEL
3-1