How To Update Programs; Terminal Program - Furuno FS-1562 Manual

6. How to Update Programs

6.1 Terminal Program

Note) The program floppy disk supplied contains both the terminal and main (main
unit) programs.
1. Quit the terminal program.
With the terminal program version -16 or later,
- press [F2]while pressing [Alt] and [Fn] keys.
With the version -15 or earlier,
- press [F2] while pressing [Fn] key.
The prompt, "A:
Note) When updating the terminal program of Ver.-11 or prior, delete "DP10.SAV"
file in advance.
1) Quit the terminal program. "A:\>DP10\TERMINAL>" will appear.
2) Confirm the above file, DP10.SAV
- Press [D], [I], [R], and [Enter] keys successively.
3) Files in "A:\>DP10\TERMINAL>" directory will shown.
4) If there is "DP10.SAV" file, delete it as follows.
- Press [D], [E], [L], [Space], [D], [P], [1], [0], [.], [S], [A], [V], and
[Enter] key successively.
2. Insert the floppy disk containing the terminal program into the FD drive.
3. Change to "B" drive by pressing keys,
- [B], [:], and [Enter], successively.
The prompt, "B:\>", will appear on the screen.
>DP10\TERMINAL>", will appear on the screen.
\
D2-10
DP-6