Changing Id (Mmsi) And Private Mode - Furuno FS-1562 Manual

Hide thumbs Also See for FS-1562:
Table of Contents

Advertisement

5. Changing ID (MMSI) and Private mode

Procedures
1. Press the NMI switch S1 on the CONTROL board with the power turned on.
2. Turn off the power.
3. Turn on the power again, then this display will appear.
Clear
NO RAM EEROM ALL
4. Select EEROM with the arrow key and press [ENT] key. A display "Now WRITING
EEROM" will appear, and after about 15 seconds another display "Turn off the
power" will appear. Then, turn off the power,
5. Turn on the power again, then this display will appear.
TEST VHF ch70
manual
6. Press [SELECT] key first and [9] key next, then this display will appear.
System <Rom Version>
V P ID DSC CH PO L
7. Put the cursor on "ID" by pressing [>] key and press [ENT] key.
Enter own identication
[digits] MMIS: - - - - - - - -
< Do not clear >
E5-9
Changing ID number
FM-8700

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents