Table of Contents
Advertisement
Dynamic radar cruise con-
trol
In vehicle-to-vehicle distance con-
trol mode, the vehicle automati-
cally accelerates and decelerates
to match the speed changes of the
preceding vehicle even if the accel-
erator pedal is not depressed. In
constant speed control mode, the
vehicle runs at a fixed speed.
Use the dynamic radar cruise con-
trol on freeways and highways.
Vehicle-to-vehicle distance con-
trol mode (P.173)
Constant speed control mode
(P.176)
System Components
Vehicle-to-vehicle distance switch
A
Display
B
Set speed
C
Indicators
D
4-5. Using the driving support systems
Cruise control switch
E
WARNING
Before using dynamic radar cruise
■
control
●
Driving safely is the sole responsibility
of the driver. Do not rely solely on the
system, and drive safely by always pay-
ing careful attention to your
surroundings.
The dynamic radar cruise control pro-
●
vides driving assistance to reduce the
driver's burden. However, there are
limitations to the assistance provided.
Read the following conditions care-
fully. Do not overly rely on this system
and always drive carefully.
• When the sensor may not be correctly
detecting the vehicle ahead:
• Conditions under which the vehi-
cle-to-vehicle distance control mode
may not function correctly:
Set the speed appropriately depend-
●
ing on the speed limit, traffic flow, road
conditions, weather conditions, etc.
The driver is responsible for checking
the set speed.
Even when the system is functioning
●
normally, the condition of the preced-
ing vehicle as detected by the system
may differ from the condition
observed by the driver. Therefore, the
driver must always remain alert, assess
the danger of each situation and drive
safely. Relying on this system or assum-
ing the system ensures safety while
driving can lead to an accident, result-
ing in death or serious injury.
Switch the dynamic radar cruise con-
●
trol off using the "ON/OFF" button
when not in use.
171
4
P.178
P.178
Advertisement
Table of Contents
