Table of Contents
Advertisement
Working basis
3.8
Fig. 25: Adjusting the handwheel into position
(1) - Graduated scale
For some adjustments, the graduated scale on the handwheel has to be
moved manually to a certain position.
In some setting programs, the handwheel is adjusted electronically.
To adjust the handwheel into position:
1. Turn the handwheel until the specified number on the graduated
Information
When the Service Stop is activated, the handwheel is easier to turn and
the degree number can be read on the control panel.
Service Instructions D869 e-con - 00.0 - 09/2023
Adjusting the handwheel into position
①
②
scale (1) is next to the marking (2).
(2) - Marking
35
Advertisement
Table of Contents
