Working basis
3.9 Adjusting the handwheel into position
Fig. 22: Adjusting the handwheel into position
(1) - Graduated scale
For some adjustments, the graduated scale on the handwheel has to be
moved manually to a certain position.
In some setting programs, the handwheel is adjusted electronically.
To adjust the handwheel into position:
1. Turn the handwheel until the specified number on the graduated
Information
When the Service Stop is activated, the handwheel is easier to turn and
the degree number can be read on the control panel.
Service Instructions D867 e-con - 00.0 - 08/2023
①
②
scale (1) is next to the marking (2).
(2) - Marking
33