Macro Operations (Menu); Macro Register Editing; Online Editing Of Macro Events - Sony XVS-9000 User Manual

Macro Operations (Menu)

You can edit macro registers and macro events using the
following menus.
Menu Function
Register menu Carry out macro
(macro register register editing.
editing)
On Line Edit Edit events in a
menu macro register,
(online editing of using the control
macro events) panel and menus.
Off Line Edit Edit events in a
menu macro register,
(offline editing of local drive, or
macro events) removable drive,
using the menus.

Macro Register Editing

In the Macro >Register menu, you can check the status and
edit macro registers.
For details about the status display, see "Effect Status
Display" (page 321). However, region names are not
displayed.
You can carry out the following editing on macro registers.
• Lock: Write-protect the data contents of the register.
• Copy: Copy data between registers.
• Delete: Delete the data contents of a register.
• Name: Attach a name to a register.
In the Macro >Register menu, use the same procedure as
when editing an effect register.
However, the region selection operation is not necessary
for macro registers.
For details, see "Effect Register Editing" (page 322).

Online Editing of Macro Events

You use the On Line Edit menu to carry out online editing
of macro events.
In the On Line Edit menu, you can check the control panel
operating sequence in the menu. You can also edit using
the control panel and menu.
To display the On Line Edit menu
1
Recall the macro register (1 to 250) you want to edit
using the control panel, and select macro editing
1)
mode .
2
Operations
• Locking a register
• Copying a
register
• Deleting a
register
• Naming a register
• Inserting an event
• Deleting an event
• Modifying an
event
• Inserting an event
• Adding an event
• Deleting an event
• Creating a new
macro
355
1) State with numeric keypad control block (see page 347), utility/
shotbox control block (see page 347), or Flexi Pad control block (see
page 352) switched to macro editing mode.
In any of the following menus, select the same register
recalled in step 1, and press [On Line Edit].
• Macro >Register >Attach menu (5411)
• Macro >Register >Lock menu (5412)
• Macro >Register >Delete menu (5416)
• Macro >Register >Rename menu (5417)
• File >Shotbox, Macro >Macro >File Edit menu
(7142.1)
The On Line Edit menu (7142.2) appears, and you can
now carry out online editing of the events for the
recalled register. Also, the control block of the control
panel operated in step 1 is assigned to control editing
operations.
Note
In the following cases, [On Line Edit] is disabled and
it is not possible to display the On Line Edit menu.
• When the recalled register and the register selected
in the menu are different.
• When a device other than [Register] is selected in
the File >Shotbox, Macro >Macro >File Edit menu
(7142.1).
• If the recalled register is locked.