Nortel CallPilot Installation And Configuration Manual page 49
Hide thumbs
Also See for CallPilot:
- Install manual (286 pages) ,
- Administrator's manual (250 pages) ,
- User manual (182 pages)
Table of Contents
Advertisement
October 2000
Backplane (tip and ring) cable
The backplane (tip and ring) cable supplied with the 201i server (NTRH3501)
provides 100Base-T Ethernet CLAN operation. This cable offers more network
throughput than the cable that is already installed on the Meridian 1.
When installed, this cable completes the connection between the left slot, the I/O
panel on the rear of the switch, and the multi I/O cable on the 201i server.
SCSI cables
Before you can connect a CD-ROM or tape drive to the 201i server, you must install
the SCSI cables. Two cables are required to route the SCSI connection away from
the 201i server faceplate so that an external SCSI device can remain permanently
connected.
Part 2: 201i Server Hardware Installation
Installing the server and connecting the peripherals
49
Advertisement
Table of Contents
