Nortel CallPilot Installation And Configuration Manual page 114

Installing the server and connecting the peripherals
5 Plug the other end of the power cord into the modem's power connector.
Result: The back of the modem appears similar to the following:
6 Power on the modem.
Note: Ensure that the modem is receiving power by checking that at least one
LED on its front panel is lit.
7 Place the modem in an area where it cannot be accidentally damaged or where
people cannot trip over attached cords.
What's next?
Lock the 201i into position, and observe the startup process. See page 115.
114
RJ-11 DIP
connection switches
1 2 3 4 5 6 7 8
Serial cable Power
connection
(RS-232)
connection
Standard 1.0
G101445
CallPilot