RSV4 RR/RF
REAR UNDERFAIRING
•
Carry out the tail fairing removal pro-
cedure.
•
Remove the starter relay box (1) from
the point indicated in the figure.
•
Remove the rear light unit.
•
Carry out the licence plate support re-
moval procedure.
•
Remove the tank.
•
Remove the battery.
•
Working from both sides of the motor-
cycle, undo and remove the two
screws (2).
•
Working from both sides of the motor-
cycle, undo and remove the two
screws (3).
•
Remove the two auxiliary fuse boxes
(4) from the corresponding supports in-
dicated in the figure.
Bodywork
BODYW - 549