APRILIA RSV4 RR Service Station Manual page 14

Characteristics
Specification
Front fork - RSV4 1000 RR Race Pack/RF
Front fork - RSV4 1000 RR
Front wheel stroke - RSV4 1000 RR Race Pack/RF
Front wheel stroke - RSV4 1000 RR
Rear shock absorber - RSV4 1000 RR Race Pack/RF
Rear shock absorber - RSV4 1000 RR
Rear wheel stroke - RSV4 1000 RR Race Pack/RF
Rear wheel stroke - RSV4 1000 RR
Specification
Size "A"
Size "B"
Brakes
Specification
Wheels and tyres
Specification
Front wheel rim
Rear wheel rim
CHAR - 14
S
USPENSION
SIZES A
Front
Rear
W
Desc./Quantity
Öhlins upside down units with adjustable hydraulic damping
and 43 mm (1.69 in) diam. stanchions with Tin surface coating)
Sachs upside-down stanchions with adjustable hydraulic
damping and 43mm (1.69 in) diameter stanchions.
120 mm (4.72 in)
121 mm (4.76 in)
With progressive linkage with APS system. Öhlins shock ab-
sorber with adjustable spring preload piggy-back, wheel-
base,compression damping and rebound damping.
With progressive linkage with APS system. Sachs shock ab-
sorber with adjustable spring preload piggy-back, wheel-
base,compression damping and rebound damping.
137 mm (5.39 in)
138.5 mm (5.45 in)
B
AND
Desc./Quantity
639.5 mm (25.18 in) (measurements refer to the bare chassis)
329.5 mm (12.97 in) (measurements refer to the bare chassis)
B
RAKES
Desc./Quantity
Dual 320 mm (12.59 inches) diam. floating disc, forged radial-
mounted single block calipers and four pistons 30 mm diam.
(1.18 inches) and 2 pads - radial pump and brake pipe in metal
disc brake -220 mm diam. (8.66 inches), 2-piston callipers - 32
mm diam. (1.25 inches) - pump with built-in tank and metal
HEEL RIMS
Desc./Quantity
3.50 x 17" RSV4 1000 RR - forging for the version RSV4 1000
RR Race Pack/RF
6.00 x 17" RSV4 1000 RR - forging for the version RSV4 1000
RR Race Pack/RF
RSV4 RR/RF
braid.
braid pipe.