Electrical system
•
Move the instrument panel to the right,
so as to remove it from its seat.
•
Once released, move the instrument
panel without disconnecting the con-
nectors from it, so as to be able to easy
access the wiring harness connector
on the vehicle.
•
Insert the rubber gasket housing the
USB port (4) into the support bracket
(3).
•
Then insert the USB port (5) in the rub-
ber gasket (4).
•
Operating from the left vehicle side, in-
sert the nut in the corresponding hous-
ing on the headlamp.
•
Place the wiring harness of the USB
cable (6) on the vehicle, making it pass
through the headlamp and the instru-
mentation support and recover the
connector (7) so as it is inside the in-
strumentation support compartment.
ELE SYS - 248
RSV4 RR/RF