APRILIA RSV4 RR Service Station Manual page 332

Engine
•
Install the head.
•
Pretighten the six nuts on the stud bolts
proceeding in the following order: 1 - 2
- 3 - 4 - 5 - 6.
•
Then tighten them fully following the
same order.
•
Tighten the two screws according to
the sequence (a - b).
•
Fit the camshaft gear
•
Keep the gear in position with the chain
tightened
THE SIDE WITH THE BEVELLED HOLE IN THE TIMING
SYSTEM GEAR MUST ALWAYS FACE THE EXTERIOR OF
THE HEAD.
ENG - 332
RSV4 RR/RF