APRILIA RSV4 RR Service Station Manual page 166

Electrical system
Function
The throttle grip is the part to which the throttle
control cables arrive; its task is to translate the rid-
er's power request (Demand) into an electrical
signal to be sent to the electronic control unit.
Operation / operating principle
The two throttle cables (opening and closing) ac-
tuate on a scroll mounted on a shaft and which is
sent back to its home position by a return spring.
On the shaft covers there are 2 double track po-
tentiometers (4 control tracks) by means of which
the torque demand is read (and checked). The 4
potentiometers are tinned and magnetically con-
trolled (contactless); they cannot be overhauled
nor replaced
Level in wiring diagram:
Hand grip position sensor
Location:
•
on the vehicle: front left part, next to the
cooling liquid radiator
•
connector: on the sensor
Electrical specifications
•
Not detected by a multimeter as they
are contactless: read the voltage of the
4 tracks by the diagnosis instrument
Pin out:
BLUE connector
•
A: Track A supply
•
B: Track A ground
•
C: Track A signal
•
D: Track B supply
•
E: Track B ground
•
F: Track B signal
WHITE connector
•
A: Track C supply
•
B: Track C ground
ELE SYS - 166
RSV4 RR/RF