Suspensions
•
Remove the rubber O ring.
•
Remove the guide bushing and the
counterspring.
(PROCEDURE FOR SACHS FORKS)
•
Discharge the fork, remove the internal
dipstick of the pumping member pin (1)
and the washer (2).
•
Operate repeatedly on the pumping
member pin (3) so as to drain com-
pletely the oil from inside.
•
Slide off the dust scraper from the
sleeve using a screwdriver as a lever.
•
During this operation, pay attention not
to damage the sleeve rim.
SUSP - 422
RSV4 RR/RF