RSV4 RR/RF
•
Connect the engine control unit wiring
connector (11) to the connector (12) of
the wiring harness on the vehicle.
•
Approach the side fairing complete
with the control unit to the vehicle, con-
nect the wiring harness (10) to the con-
trol unit V4-MP using the connector.
•
Fix the wiring harness of the control
unit to the wiring harness of the vehicle
using the nylon clamp (13)
•
Place the left side fairing on the vehi-
cle, first fix it to the top fairing and then
fix it with the relative fixing screws (3)
•
Fix the expansion cap fixing the side
fairing (2) to the lower fairing
•
Fix the three expansion caps (1) on the
inside of the side fairing
Sincronizzazione
To use the system V4-MP the synchronisation that differs depending on the operating system must be
performed:
iOS OPERATING SYSTEM
Electrical system
ELE SYS - 253