RSV4 RR/RF
•
Apply Loctite 243 thread lock on the
thread of the timing gear fastener
screw. This screw must be replaced at
each reassembly.
•
Apply and loosely tighten the gear fix-
ing screw on the camshaft.
•
Protect the edge of the head with rubber.
•
Load the chain tensioner with special tool.
Specific tooling
020981Y Lever for disarming the hydraulic tensioner of the timing chain
•
Block crankshaft rotation using one of
the specific tools.
•
Tighten the gear fixing screw on the
camshaft to exactly the torque speci-
fied.
•
Remove the crankshaft locking tool.
Specific tooling
020850Y Primary gear lock
020914Y Flywheel retainer
Engine
ENG - 351