APRILIA RSV4 RR Service Station Manual page 435

Table of Contents

Advertisement

RSV4 RR/RF
Oil level: 110 mm (4.33 in) (from the sleeve
edge, without a spring and with preload pipe).
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER
TO MEASURE THE CORRECT OIL LEVEL. THE OIL LEVEL
MUST BE THE SAME IN BOTH STANCHIONS.
Characteristic
Fork oil
530 cc (0.12 Uk gal) (for each stanchion)
Insert the pre-loading spring while
maintaining the pin in the raised posi-
tion.
Insert the pre-loading spring retaining
ring (1).
Insert the nut (2).
While maintaining the spring com-
pressed, tighten the nut as far as it will
go.
Screw the complete cap into place on
the plunger pin.
Suspensions
SUSP - 435

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rsv4 rf

Table of Contents