Ss-1007 Board, Wf-1008 Board - Sony ILME-FX6V Service Manual

2-3-9. SS-1007 Board, WF-1008 Board

Preparation
1. Remove the top cabinet and the bottom cover. (Refer to "2-2. Top Cabinet, Bottom Cover".)
2. Remove the inside panel. (Refer to "2-3. Inside Panel".)
3. Remove the lithium battery. (Refer to "2-3-1. Lithium Battery".)
4. Remove the HP-1015 board. (Refer to "2-3-2. HP-1015 Board".)
5. Remove the FU-1001 board assembly. (Refer to "2-3-5. FU-1001 Board".)
6. Remove the TG-1005 board assembly and the SH-1030 board. (Refer to "2-3-6. TG-1005 Board,
SH-1030 Board".)
7. Remove the WB-1002 board assembly. (Refer to "2-3-7. WB-1002 Board".)
8. Remove the VSW-1001 board. (Refer to "2-3-8. VSW-1001 Board, SW-1037 Board".)
Procedure
1. Remove the three screws, and then remove the REC button base assembly in the direction of the
arrow.
TP2 x 5
REC button
base assembly
WF-1008 board
Hook
Note
When installing the REC button base assembly, fix the WF-1008 board to the hook.
Hole
Hole
Bosses
67