Sony ILME-FX6V Service Manual page 102

3. Open the SDI terminal cover.
4. Remove the two screws, and then remove the TC-1002 board assembly.
Screw tightening sequence and
attachment position
(a)
(b)
Note
When installing the TC-1002 board assembly, tighten the screws in the following sequence: (a), (b).
5. Remove the screw, and then remove the TC-1002 board.
TC frame
Note
When installing the TC-1002 board, push the TC frame in the direction of the arrow and tighten the
screw.
6. Install the removed parts by reversing the steps of removal.
P2.6 x 5
TC-1002 board
P2.6 x 5
SDI terminal cover
Pushing directions of parts
when tightening screw
TC frame
TC-1002 board assembly
99