2-3-4. SEL-1001 Board
Preparation
1. Remove the top cabinet and the bottom cover. (Refer to "2-2. Top Cabinet, Bottom Cover".)
2. Remove the inside panel. (Refer to "2-3. Inside Panel".)
3. Remove the KY-1031 board. (Refer to "2-3-3. KY-1031 Board, PS-1004 Board".)
Procedure
1. Remove the screw, and then remove the AU holder assembly.
2. Remove the SEL-1001 board.
TP2 x 5
AU holder assembly
Holes
Holes
SEL-1001 board
Bosses
Bosses
3. Install the removed parts by reversing the steps of removal.
54