2-16-6. HK-1003 Board
Preparation
1. Remove the HC-1002 board. (Refer to "2-16-1. HC-1002 Board".)
2. Remove the handle top cover assembly. (Refer to "2-16-2. Handle Top Cover Assembly".)
3. Remove the HN-1054 board. (Refer to "2-16-4. HN-1054 Board".)
4. Remove the HS-1008 board. (Refer to "2-16-5. HS-1008 Board".)
Procedure
1. Release the three flexible boards from the three hooks.
2. Remove the three screws, and then remove the ZOOM plate and the control switch block (GZ95800).
P2 x 4
(c)
Hole
ZOOM plate
Control switch block
(GZ95800)
Bosses
Flexible board
Hooks
P2 x 4
(b)
P2 x 4
(a)
Hole
Flexible boards
117