3. Disconnect the flexible flat cable from the connector (CN1000) on the FT-2001 board.
4. Disconnect the coaxial cable from the connector (J0201) on the CK-1027 board.
5. Disconnect the two flexible boards from the connectors (CN0100, CN0102) on the CK-1027 board.
Flexible boards
Note
When connecting the coaxial cable, observe the following instructions.
•
Arrange the coaxial cable so that it passes through the groove.
•
Pass the coaxial cable under the flexible flat cable and arrange it so that it does not protrude
higher than the CK-1027 board.
CN1000
FT-2001 board
Flexible flat cable
Coaxial cable
J0201
CN0100
CN0102
Groove
Coaxial cable
J0201
CK-1027 board
Flexible flat cable
CK-1027 board
87