4. Remove the five screws.
Pushing directions
Note
At the time of installation, push the parts in the direction of the arrow as shown in the figure, then
tighten the screws in the following sequence: (a), (b), (c), (d).
5. Remove the two screws.
P2 x 4
(a)
Note
At the time of installation, push the parts in the direction of the arrow as shown in the figure, then
tighten the screws in the following sequence: (a), (b).
(a)
(b)
(a)
(b)
P2 x 4
(b)
P2 x 4
(a)
P2 x 4
(b)
(c)(d)
P2 x 4
(d)
(c)(d)
Pushing directions
(a)
(a)
P2 x 4
(c)
(b)
(b)
111