Sony ILME-FX6V Service Manual page 54

7. Disconnect the flexible board from the connector (CN0105) on the KY-1031 board.
8. Remove the control switch block (AU95700).
Flexible board
KY-1031 board
9. Remove the five screws, and then remove the KY board plate.
10. Disconnect the harness from the connector (CN0300) on the KY-1031 board.
11. Remove the speaker assembly.
(a)
(d)
KY board plate
Holes
Bosses
CN0300
(KY-1031 board)
Note
When installing the KY board plate, tighten the screws in the following sequence: (a), (b), (c), (d),
(e).
Holes
CN0105
TP2 x 5
(e)
(c)
(b)
Control switch block
(AU95700)
Bosses
Speaker assembly
51