2-17. Panel (VF)
2-17-1. PD-1066 Board
Procedure
1. Remove the screw (P2 x 4).
2. Release the two hooks, and then remove the P harness guide.
3. Remove the two screws (TP1.7 x 5).
4. Release the two hooks, and then remove the harness guide plate.
Note
When installing the P harness guide, push the P harness guide in the direction of the arrow and
tighten the screws.
Hooks
P harness guide
TP1.7 x 5
Pushing directions
P2 x 4
Harness guide plate
Hooks
122