Outside Block; Handle Block - Sony ILME-FX6V Service Manual

Solid-state memory camcorder
Table of Contents

Advertisement

1-3-5. Outside Block

DC-1023 board
The DC-1023 board contains a DC IN jack.
JK-1029 board
The JK-1029 board contains a 3.5ϕ jack connector only for grip connection.
Connection to the grip starts power supply from the VC-1046 board and UART signal communication.
LC-1052 board
The LC-1052 board contains a USB/multi connector, a REMOTE connector, a TC IN/OUT switch, and an
NFC Plug IC.
USB signals are received from and sent to IC2000 on the VC-1046 board through the USB/multi
connector.
The LANC signals are received from and sent to IC5200 on the VC-1046 board through the REMOTE
connector. Power is also supplied through the REMOTE connector.
The NFC Plug IC sends and receives data from IC2000 on the VC-1046 board through the NFC antenna.
VF-1024 board
The VF-1024 board contains a connector for connection to the viewfinder. This connector is connected to
the PD-1066 board through the viewfinder cable.
WF-12 board
The WF-12 board contains a Wi-Fi antenna.

1-3-6. Handle Block

AXM-1002 board
The AXM-1002 board contains an XLR connector, an external input ADC, an INPUT switch
(LINE/MIC/MIC+48V) of the XLR connector, and a power IC (IC2001).
External audio input signals connected to the XLR connector are input to the ADC and are converted to
digital data.
The converted digital data is input to IC8000 on the VC-1046 board.
IC2001 generates a 48 V voltage. When MIC+48V is selected, the 48 V is supplied to the XLR connector
on the AXM-1002 board.
DL-1007 board
The DL-1007 board contains a photo reflector to activate the handle-assignable dial.
FP-310 board
The FP-310 board contains an MI SHOE connector.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ilme-fx6vkIlme-fx6tIlme-fx6tk

Table of Contents