Hd-1006 Board - Sony ILME-FX6V Service Manual

2-12-3. HD-1006 Board

Note
The following parts are not reusable. Prepare new parts in advance.
• Tape AS: 1 pc
Preparation
1. Remove the top cabinet and the bottom cover. (Refer to "2-2. Top Cabinet, Bottom Cover".)
2. Remove the inside panel. (Refer to "2-3. Inside Panel".)
3. Remove the outside panel. (Refer to "2-4. Outside Panel".)
4. Remove the VC-1046 board. (Refer to "2-5. VC-1046 Board".)
5. Remove the CK-1027 board. (Refer to "2-8. CK-1027 Board".)
6. Remove the VF-1024 board. (Refer to "2-10. VF-1024 Board".)
Procedure
1. Disconnect the fine-wire coaxial cable from the connector (CN1501) on the HD-1006 board.
2. Disconnect the flexible board from the connector (CN1502) on the HD-1006 board.
Fine-wire coaxial cable
HD-1006 board
CN1502
CN1501
Flexible board
102