Table of Contents
Advertisement
HC-1002 board
The HC-1002 board is a handle-side connector board for relay between the unit and the handle.
This board relays the switch signals of the handle and power and communication lines of the internal
microphone in the handle, audio input connectors (INPUT1 and INPUT2), and MI SHOE.
HK-1003 board
The HK-1003 board contains a handle recording START/STOP button, ASSIGN7, ASSIGN8, and a
handle HOLD switch.
This board relays the handle assignable dial signals.
HN-1054 board
The HN-1054 board contains an MI SHOE ADC and an ADC of the internal microphone in the handle.
The audio signals input from the microphone in the MI SHOE handle are converted to digital data in the
ADC and the digital data is sent to IC8000 on the VC-1046 board.
The HN-1054 board relays the REC·ZOOM KEY, ASSIGN7, ASSIGN8, and multi-selector signals.
HS-1008 board
The HS-1008 board contains a multi-selector (8 directions + determination) button.
This board relays the handle zoom signal and the signals from the HK-1003 board.
1-3-7. Viewfinder Block
PD-1066 board
The PD-1066 board is connected to the panel module and the VF cable.
Parallel video signals are output from IC1000 on the VC-1046 board and are converted to a serial signal
in IC7500 on the VC-1046 board.
Panel control signals are received from IC1000 on the VC-1046 board.
The PD-1066 board contains a MIRROR switch (3-position slide switch) to select ROTATE, B/T or OFF
of the viewfinder.
PSW-1001 board
The PSW-1001 board contains ZEBRA, PEAKING, and ASSIGN10 buttons.
14
Advertisement
Table of Contents
