Table of Contents
Advertisement
2-11. JK-1029 Board
Preparation
1. Remove the top cabinet and the bottom cover. (Refer to "2-2. Top Cabinet, Bottom Cover".)
2. Remove the outside panel. (Refer to "2-4. Outside Panel".)
Procedure
1. Disconnect the harness from the connector (CN1202) on the LC-1052 board.
2. Remove the two screws, and then remove the TC switch holder assembly.
TC switch holder assembly
CN1202
LC-1052 board
P1.7 x 3
Harness
93
Advertisement
Table of Contents
