Table of Contents
Advertisement
2-16-5. HS-1008 Board
Preparation
1. Remove the HC-1002 board. (Refer to "2-16-1. HC-1002 Board".)
2. Remove the handle top cover assembly. (Refer to "2-16-2. Handle Top Cover Assembly".)
3. Remove the HN-1054 board. (Refer to "2-16-4. HN-1054 Board".)
Procedure
1. Disconnect the two flexible flat cables and the flexible board from the connectors (CN0100, CN0101,
CN0102) on the HS-1008 board.
2. Remove the three screws, and then remove the HS-1008 board.
P2 x 4
(a)
Contact side:
(c)
(b)
Flexible flat cable
Hole
CN0100
HS-1008 board
Hole
CN0102
CN0101
Boss
Flexible flat cable
Boss
Flexible board
3. Install the removed parts by reversing the steps of removal.
116
Advertisement
Table of Contents
