2. Disconnect the three flexible boards from the connectors (CN0100, CN0101, CN0102) on the
CR-1006 board.
3. Remove the two screws, and then half turn the CR-1006 board.
4. Disconnect the flexible board (FP-312) from the connector (CN0103) on the CR-1006 board.
Flexible board
(FP-2462)
Note
•
When installing the CR-1006 board, tighten the screws while pushing the board against the U
sheet (958).
•
When installing the CR-1006 board, tighten the screws in the following sequence: (a), (b).
5. Install the removed parts by reversing the steps of removal.
CN0101
CR-1006 board
(a)
CN0100
CN0102
Flexible board
(MOUNT)
P1.7 x 3
(b)
CN0103
U sheet (958)
Flexible board
(FP-319)
Flexible board
(FP-312)
82