Cr-1006 Board - Sony ILME-FX6V Service Manual

2-7-1. CR-1006 Board

Preparation
1. Remove the top cabinet and the bottom cover. (Refer to "2-2. Top Cabinet, Bottom Cover".)
2. Remove the inside panel. (Refer to "2-3. Inside Panel".)
3. Remove the outside panel. (Refer to "2-4. Outside Panel".)
4. Remove the front block. (Refer to "2-7. Front Block".)
Procedure
1. Peel off the harness front guide.
Note
At the time of installation, attach the harness front guide as shown in the figure.
Harness front guide
Attachment of the harness front guide
Pass the flexible
board through the
notch of the harness
front guide.
Align the edge with
the edge.
Harness front guide
81