3. Disconnect the flexible flat cable from the connector (CN1203) on the LC-1052 board.
4. Remove the screw, and then remove the JK-1029 board assembly.
JK-1029 board assembly
CN1203
LC-1052 board
P1.7 x 3
Flexible flat cable
5. Disconnect the flexible flat cable from the connector (CN1000) on the JK-1029 board.
6. Remove the screw, and then remove the JK-1029 board.
Bosses
JK-1029 board
Holes
P1.7 x 3
Flexible flat cable
CN1000
Reinforcing plate side:
7. Install the removed parts by reversing the steps of removal.
94