Removing A Memory Module - Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide

8.4.13 Removing a Memory Module

Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.
For details, see
Step 5 Determine the position of the memory module.
Figure 8-41 Memory slots
Step 6 Remove the memory module.
1.
2.
Issue 17 (2021-03-09)
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.23 Removing the Air
Open the memory module ejectors on the memory slot. See (1) in
8-42.
Remove the memory module from the slot. See (2) in
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
Duct.
8 Parts Replacement
Figure
Figure 8-42.
75