Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual page 72

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Figure 8-24 Positions and slots of the M.2 FRUs
Step 2 Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
1.
2.
Figure 8-25 Removing an M.2 FRU
Step 3 Place the removed component in an ESD bag.
Place only one component in an ESD bag.
Step 4 Install an M.2 FRU filler module to shield the EMC.
----End
Issue 17 (2021-03-09)
Open the handle of the M.2 FRU. See (1) in
Remove the M.2 FRU. See (2) in
NO TICE
NO TE
Perform this step only when an M.2 FRU is not installed immediately.
Copyright © Huawei Technologies Co., Ltd.
Figure 8-25.
Figure 8-25.
8 Parts Replacement
63