Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
●
Step 2 Check the iBMC and BIOS configurations.
After the mainboard is replaced, the original iBMC or BIOS configuration will be
lost. If the current iBMC or BIOS parameters have been adjusted based on service
scenarios, ensure that the parameter configuration is the same as that before the
mainboard is replaced to ensure that services are not affected after the mainboard
is replaced.
Step 3 Export the iBMC or BIOS configuration files.
For details, see
Step 4 Power off the server node.
For details, see
Step 5 Remove the server node.
For details, see
Step 6 Place the server node on the ESD workstation.
Step 7 Remove the air duct.
For details, see
Step 8 Determine the position of the mainboard and the server node case.
Issue 17 (2021-03-09)
On the iBMC CLI, run the ipmcget -d version command to obtain the
information.
CA UTION
FusionServer Pro X6000 Server iBMC User Guide
NO TE
● The iBMC supports import and export of configuration files from version 2.32.
● After replacing the mainboard, import the iBMC and BIOS configuration files that are
exported from the iBMC. However, the exported configuration file does not contain
password information. You need to manually configure the password for the iBMC user.
For details about how to import and export the configuration file, see
X6000 Server iBMC User Guide
● The iBMC and BIOS configuration files exported from the iBMC contain the
configuration list. For details, see "Configuration File Description" in
X6000 Server iBMC User Guide
● If the iBMC and BIOS configuration files are not exported before the mainboard is
replaced, manually configure the iBMC and BIOS data after replacing the mainboard.
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.23 Removing the Air
Copyright © Huawei Technologies Co., Ltd.
.
.
Procedure.
V5.
Duct.
8 Parts Replacement
.
FusionServer Pro
FusionServer Pro
98
Advertisement
Table of Contents
