Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual page 55

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 5 Remove the server node.
● When removing a device, wear protective gloves to avoid burns.
● To prevent device damage or personal injury, hold the bottom of the device
1.
2.
3.
4.
Figure 8-6 Removing the server node
Step 6 Place the removed server node in an ESD bag.
Issue 17 (2021-03-09)
Figure 8-5 Removing an optical module using die-casting pliers
NO TICE
with both hands when removing it.
Press the ejector release button on the server node. See (1) in
Fully open the ejector lever. See (2) in
Holding the ejector lever, pull the server node out of the chassis horizontally.
See (3) in Figure 8-6.
Close the ejector lever.
Copyright © Huawei Technologies Co., Ltd.
8 Parts Replacement
Figure 8-6.
Figure 8-6.
46