Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 6 Disconnect the cable between the PCIe card and the NC-SI port.
For details, see
Step 7 Remove the PCIe card.
For details, see
Step 8 Place the removed PCIe riser module and PCIe card in different ESD bags.
Place only one component in an ESD bag.
Step 9 Install a filler panel.
Issue 17 (2021-03-09)
Figure 8-58 Removing a PCIe riser module
7.4 PCIe Card
NO TE
This operation is required only when the PCIe card is an SP380 NIC (BOM code: 02312JBD).
8.4.19 Removing a PCIe
NO TICE
NO TE
Perform this operation only when a PCIe riser module is not installed immediately.
Copyright © Huawei Technologies Co., Ltd.
Cabling.
Card.
8 Parts Replacement
91
Advertisement
Table of Contents
