Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual page 69

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Take the component out of its ESD bag.
Step 5 Determine the position of the supercapacitor.
Step 6 Vertically insert the supercapacitor into the holder until the supercapacitor is
locked.
Figure 8-22 Installing a supercapacitor
Step 7 Connect the cable between the supercapacitor and the screw-in RAID controller
card.
Step 8 Install the supercapacitor and its holder.
1.
2.
3.
Figure 8-23 Installing a supercapacitor holder
Issue 17 (2021-03-09)
8.3.3 Removing an XH321
Install the supercapacitor holder into the node panel and tighten the screws
to secure the supercapacitor holder. See (1) in
Install the node panel. See (2) in
Tighten the screws to secure the panel. See (3) in
Copyright © Huawei Technologies Co., Ltd.
V5.
Figure
Figure 8-23.
Figure
8 Parts Replacement
8-23.
8-23.
60