Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 7 Install the PCIe riser module.
For details, see
Step 8 Install the server node.
For details, see
Step 9 Power on the server node.
For details, see
Step 10 Log in to the iBMC WebUI, and check whether the new component is normal.
For details, see
Step 11 Install the driver for the PCIe card.
----End
8.4.21 Removing a PCIe Riser Module
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Determine the position of the PCIe riser module.
Step 5 Remove the PCIe riser module.
1.
2.
3.
4.
Issue 17 (2021-03-09)
8.4.22 Installing a PCIe Riser
8.3.4 Installing an XH321
8.3.1 Power-On
FusionServer Pro X6000 Server iBMC User Guide
NO TE
If the new PCIe card model is different from the old PCIe card model, install the new PCIe
card driver.
8.3.2 Power-Off
8.3.3 Removing an XH321
Use a Phillips screwdriver to loosen the screws on the cover of the server
node. See (1) in
Figure
Remove the cover from the server node in the arrow direction. See (2) in
Figure
8-58.
Use a Phillips screwdriver to loosen the screw that secures the PCIe riser
module. See (3) in
Figure
Lift the PCIe riser module in the arrow direction. See (4) in
Copyright © Huawei Technologies Co., Ltd.
Module.
V5.
Procedure.
Procedure.
V5.
8-58.
8-58.
8 Parts Replacement
.
Figure
8-58.
90
Advertisement
Table of Contents
