Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 5 Click Open.
The PuTTY screen is displayed. Then the message "login as:" is displayed,
prompting you to enter a user name.
Step 6 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the
prompt.
----End
10.4.2 Logging In to the CLI Using PuTTY over a Serial Port
Scenarios
Use PuTTY to log in to a server over a serial port when:
●
●
Procedure
Step 1 On the PC, double-click PuTTY.exe.
The PuTTY Configuration window is displayed.
Step 2 In the navigation tree, choose Connection > Serial.
Step 3 Set the login parameters.
The parameters are described as follows:
●
●
●
●
●
●
Issue 17 (2021-03-09)
NO TE
● If this is your first login to the server, the PuTTY Security Alert dialog box is displayed.
Click Yes to proceed.
● If an incorrect user name or password is entered, you must set up a new PuTTY session.
You want to perform initial configuration of the server.
The server is inaccessible over a network port.
NO TE
● You can obtain the PuTTY software from the chiark home page.
● You are advised to use PuTTY of the latest version. PuTTY of an earlier version may
cause login failures.
Serial Line to connect to: COMn
Speed (baud): 115200
Data bits: 8
Stop bits: 1
Parity: None
Flow control: None
NO TE
n in COM n indicates a serial port number, and its value is an integer.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
141
Advertisement
Table of Contents
