Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
For details, see "Avago SAS3004iMR > Troubleshooting > Hard Drive Fault" in
Huawei V5 Server RAID Controller Card User Guide
----End
8.4.11 Removing a Processor
● Only Huawei technical support or personnel authorized by Huawei can remove
● Do not wear ESD gloves during processor replacement. The gloves may catch
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.
For details, see
Step 5 Determine the position of the processor.
Figure 8-29 Positions of processors
Issue 17 (2021-03-09)
NO TICE
the processors from Huawei servers.
on pins on the processor socket and damage it.
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.23 Removing the Air
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
Duct.
8 Parts Replacement
.
66
Advertisement
Table of Contents
