Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
10.3.2.2.3 Mac
The following macOS version is supported:
●
Procedure
Step 1 Configure an IP address for the client (local PC) to enable communication with
the iBMC management network port.
Step 2 Open the console and set the folder where the Independent Remote Console is
stored as the working folder.
Step 3 Grant the execute permission on the Independent Remote Console.
chmod +x KVM.sh
Step 4 Open the Independent Remote Console.
./KVM.sh
The Independent Remote Console login page is displayed.
Figure 10-27 Independent Remote Console login page
Step 5 Enter the network address, user name, and password.
Issue 17 (2021-03-09)
macOS X El Capitan
NO TE
● The network address can be in either of the following formats:
iBMC management network port IPv4 or IPv6 address : Port number
–
The IPv6 address must be enclosed in brackets. Example: [fc::64]:444 or
192.168.100.1:444.
iBMC domain name address : Port number
–
● Local and LDAP domain users are supported.
● The preferred port number is the HTTPS service port number, and then the RMCP+
service port number.
● The default port number can be omitted.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
135
Advertisement
Table of Contents
