Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
●
Issue 17 (2021-03-09)
b.
Enter the user name and password.
NO TE
▪
The system provides a default user in the administrator group. The default
user is Administrator, and the default password is Admin@9000.
▪
When Domain is Local iBMC, the maximum length of the user name is 20
characters.
▪
When Domain is not Local iBMC, the maximum length of the user name is
255 characters.
c.
Select This iBMC or Automatic matching from the Domain drop-down
list.
d.
Click Log In.
After the login is successful, the Overview page is displayed, showing the
user name in the upper right corner.
NO TE
▪
The system may display a message indicating incorrect user name or
password when you attempt to log in using Internet Explorer after the system
is upgraded. If this occurs, press Ctrl+Shift+DEL, click Delete to clear the
browser cache, and attempt to log in again.
▪
If the login still fails, choose Tools > Internet Options > Advanced in the
menu bar and click Reset to restore default settings of Internet Explorer. Then
attempt to log in again.
Log in as an LDAP user.
NO TICE
Before login, ensure that the following settings meet the requirements:
– A domain controller exists on the network, and a user domain and LDAP
users have been created on the domain controller.
For details about how to create a domain controller, a user domain, and
LDAP users, see the documents about the domain controller. The iBMC
provides only the access function for LDAP users.
– On the Configuration > LDAP page of the iBMC WebUI, the LDAP function
is enabled, and the user domain and the LDAP user who belong to the user
domain are set.
a.
Select a language.
b.
Enter the LDAP user name and password.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
108
Advertisement
Table of Contents
