Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
●
Procedure
Step 1 Configure an IP address for the client (local PC) to enable communication with
the iBMC management network port.
Step 2 Double-click KVM.exe.
Open the Independent Remote Console.
Figure 10-9 Independent Remote Console login page
Step 3 Enter the network address, user name, and password.
Step 4 Select a login mode.
●
●
Step 5 Click Connect.
A security warning is displayed.
Issue 17 (2021-03-09)
Windows Server 2012 64-bit
NO TE
● The network address can be in either of the following formats:
iBMC management network port IPv4 or IPv6 address : Port number
–
The IPv6 address must be enclosed in brackets. Example: [fc::64]:444 or
192.168.100.1:444.
–
iBMC domain name address : Port number
● iBMC V228 and earlier versions support only local users. iBMC V228 and later versions
support local users and LDAP domain users.
● In versions earlier than iBMC V228, the port number is the RMCP+ service port number.
In iBMC V228 and later versions, the port number is the HTTPS service port number.
● The default port number can be omitted.
Shared Mode: allows two users to access and manage the server node at the
same time. Each user can view the operations performed by the other user.
Private Mode: allows only one user to access and manage the server node at
a time.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
122
Advertisement
Table of Contents
