Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
8.4.1 Removing an M.2 SSD
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.
For details, see
Step 5 Determine the position of the M.2 SSD.
Figure 8-12 Positions of M.2 SSDs
Step 6 Remove the TPM.
For details, see
Step 7 Remove the M.2 SSD.
1.
2.
Issue 17 (2021-03-09)
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.23 Removing the Air
8.4.15 Removing the
Use an M2.5 Phillips screwdriver to loosen the screw that secures the M.2
SSD. See (1) in
Figure
Tilt the M.2 SSD 20° to 30° upwards, and pull it out. See (2) in
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
Duct.
TPM.
8-13.
8 Parts Replacement
Figure
8-13.
51
Advertisement
Table of Contents
