Logging In To The Ibmc Webui (V600 And Later Versions) - Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual

Server node
Hide thumbs Also See for FusionServer Pro XH321 V5:
Table of Contents

Advertisement

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
----End
10.2.2 Logging In to the iBMC WebUI (V600 and Later
Versions)
Scenarios
Log in to the iBMC WebUI. The following uses Internet Explorer 11.0 as an
example.
Procedure
Step 1 Check that the client (for example, a local PC) used to access the iBMC meets the
operating environment requirements.
Issue 17 (2021-03-09)
NO TE
LDAP user name (In this case, Domain can be Automatic matching or a
specified domain.)
LDAP user name@Domain name (In this case, Domain must be Automatic
matching.)
In versions earlier than iBMC V294, the maximum password length for an
LDAP user is 20 characters. In iBMC V294 and later versions, the maximum
password length for an LDAP user is 255 characters.
c.
Select the LDAP user domain from the Domain drop-down list.
NO TE
Configured domain servers: Select a domain server to log in as an LDAP
user. The iBMC automatically locates the user from the domain server.
Automatic matching: If this option is selected, the iBMC searches for the
user from the local user list first. If no match is found, the iBMC searches
from the domain servers in the sequence displayed in the Domain drop-down
list.
d.
Click Log In.
After the login is successful, the Overview page is displayed, showing the
user name in the upper right corner.
NO TE
● A maximum of four users can log in to the iBMC WebUI at the same time.
● By default, the system timeout period is 5 minutes. If no operation is performed on the
WebUI within 5 minutes, the user will be automatically logged out of the WebUI.
● The system locks a user account if the number of consecutive incorrect password
attempts reaches the maximum. The user account is automatically unlocked after the
locking duration reaches the value specified.
● For security purposes, change the initial password upon the first login and periodically
change the password.
● If resources fail to be obtained due to unstable network connection, the iBMC WebUI
may be displayed abnormally. If this occurs, refresh the browser and log in to the iBMC
WebUI again.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
109

Advertisement

Table of Contents
loading

Table of Contents