Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Silkscreen
-
-
-
-
Issue 17 (2021-03-09)
Indicator/
Button
UID button/
indicator
Data
transmission
rate indicator
for a 10GE
optical port
Connection
status
indicator/
Data
transmission
status
indicator for a
10GE optical
port
Data
transmission
status
indicator for a
GE electrical
port
Connection
status
indicator for a
GE electrical
port
Copyright © Huawei Technologies Co., Ltd.
Description
The UID button/indicator helps identify and
locate a device.
UID indicator:
● Off: The device is not being located.
● Blinking or steady blue: The device is being
located.
UID button:
● You can control the UID indicator status by
pressing the UID button or using the iBMC.
● You can press this button to turn on or off
the UID indicator.
● You can press and hold down this button for
4 to 6 seconds to reset the iBMC.
● Off: The network port is not connected.
● Steady green: The data transmission rate is
10 Gbit/s.
● Off: The network port is not connected.
● Blinking green: Data is being transmitted.
● Steady green: The network port is properly
connected.
● Off: No data is being transmitted on the
port.
● Steady yellow: The network port is in active
status.
● Blinking yellow: Data is being transmitted.
● Off: The network port is not connected.
● Steady green: The network port is properly
connected.
2 Hardware Description
8
Advertisement
Table of Contents
