Removing The Battery - Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
----End

8.4.17 Removing the Battery

Procedure
Step 1 Confirm the BIOS configuration.
After the battery is replaced, the original BIOS configuration will be lost. If the
current BIOS parameters have been adjusted based on service scenarios, ensure
that the parameter configuration is the same as that before the battery is replaced
to ensure that services are not affected after the battery is replaced.
Step 2 Export the BIOS configuration file.
For details, see
Step 3 Power off the server node.
For details, see
Step 4 Remove the server node.
For details, see
Step 5 Place the server node on the ESD workstation.
Step 6 Determine the position of the battery.
Issue 17 (2021-03-09)
The TPM settings take effect after the server is restarted.
CA UTION
FusionServer Pro X6000 Server iBMC User Guide
NO TE
● The iBMC supports import and export of configuration files from version 2.32.
● The BIOS configuration file exported from the iBMC can be directly imported after the
battery is replaced. If the exported configuration file contains ciphertext, change the
ciphertext to plaintext and delete the comment tags from the line. For details about
how to import and export configurations, see
User Guide
.
● The BIOS configuration file exported from the iBMC contains the configuration list. For
details, see "Configuration File Description" in
User Guide
.
● If the iBMC cannot be logged in to or the BIOS configuration file is not exported before
the battery is replaced, you need to manually reconfigure the BIOS after replacing the
battery.
8.3.2 Power-Off
8.3.3 Removing an XH321
Copyright © Huawei Technologies Co., Ltd.
FusionServer Pro X6000 Server iBMC
FusionServer Pro X6000 Server iBMC
Procedure.
V5.
8 Parts Replacement
.
84